59
changing for more than four seconds, the new focus position wiII be memorized
as the reference and the alarm wiII stop.
NOTE:
The INT FOCUS and FIX FOCUS detect modes wiII be activated
only with the Auto Focus mode.
INT AE (InternaI AE)
When Auto Exposure (AE) movement is detected, the alarm wiII be triggered; if
the Exposure level returns to the original level, the alarm wiII stop.
FIX AE
The alarm wiII be triggered if the Exposure value changes; if the adjusted AE
value retains for four seconds, the value wiII be saved as the reference and the
alarm wiII stop.
MOTION
Motion Detection function allows detecting suspicious motion and triggering
alarms when motion volume in the detected area reaches/exceeds the
determined sensitivity threshold value. The main menu is shown below:
• BLOCK MODE
In Motion Detect Mode, users can set Block Mode as "ON" or "OFF". When
BLOCK MODE is turned on, if there are any variations (e.g. caused by intrusion)
in the sections of the monitoring image, the affected parts wiII be high lighted
dynamically.
• FRAME SET
In a monitored field, users can define specific areas as motion detection target
zones. Please refer to the instructions as follows to configure parameters for
each motion detection zone so-called "Frame". When motion is detected within a
ALARM DETECT
DETECT SWITCH
ON
DETECT MODE
MOTION
BLOCK MODE
ON
FRAME SET
01
FRAME DISABLE
01
THRESHOLD 016
EXIT YES
