43
•
ANGLE ADJUSTER
The item is for adjusting the angle range of tiIt motion. The Range of the tiIt motion
varies in different FLIP modes: the angle ranges from -10°
to +100°
in the M.E. FLIP
and FLIP OFF modes, and from -10° ~ +190° in the IMAGE FLIP mode.
• SPEED BY ZOOM
If the item is set to <ON>, the pan/tiIt speed wiII be automatically adjusted
by internal algorithm when zooming. The larger zoom ratio leads to the
lower rotating speed.
• AUTO CALI (Auto Calibration)
There are one horizontal point and one vertical infrared rays check point in each
dome. During installation or maintenance, the dome camera's position may be
moved. Therefore, the relative distance between the original set point and the
check point wiII be changed. If the Auto Calibration
function is enabled, the dome
camera wiII automatically detect the matter and resets the horizontal point back
to the original position.
• PASSWORD
The administrator can activate OSD Password function for security concerns.
Once the function is turned on, users are required to enter the password every
time when accessing to the OSD menu. The Password setting menu is shown
below:
The password setting procedure is like the following:
STEP1: Choose a number with the joystick and then press the
<CAMERA OFF>
button (<ENTER>) to input. For example:
<0> <CAMERA OFF>
,
<1> <CAMERA OFF>, <2> <CAMERA OFF>,
<3> <CAMERA OFF>.
ANGLE ADJUSTER
ADJUST MIN ANGLE
-10DEG
ADJUST MAX ANGLE
100DEG
EXIT + SAVE
YES
NEW PASSWORD:_ _ _ _
CONFIRM PASSWORD:_ _ _ _
0123456789
<- SAVE EXIT
