47
the dome camera to a targeted shooting area/point.
STEP 3: Press the <CAMERA OFF> button again to save the defined preset point.
Once completing setup of a preset point, users could move the cursor to the next
item to run the preset point.
•
PRESET RUN
Press the
<CAMERA OFF>
button and the camera wiII go to the appointed point.
To run other defined preset points select the preset point you want to go and
press the
<CAMERA OFF>
button again.
• EXIT
Exit the PRESET menu and go back to the
MAIN PAGE 2
to carry on setup of
sequence.
NOTE: Users could set preset points through a keyboard. Please
refer to the control keyboard's quick guide for further information.
3.3.13 SEQUENCE
The function executes pre-positioning of the pan, tiIt, zoom and focus features in a
certain sequence for a camera. Before setting this function, users must pre-
define at least two preset points.
• SEQUENCE LINE
There are eight sets of sequence lines built in the dome camera.
Using the joystick to select a line first and then set its sequence points.
MAIN PAGE 2
ID DISPLAY
ON
TITLE DISPLAY
OFF
TITLE SETTING
01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING
ENTER
SEQUENCE
SEQUENCE LINE
1
SEQUENCE POINT
01
PRESET POSITION
001
SPEED 01
DWELL TIME
001
RUN SEQUENCE
ENTER
EXIT YES
(*)
CAUTION!
If you run preset points
via GscTelecontrol/MBeg
,
some
preset
positions
are
not available
,
because they
are reserved
for
special functions
!!
See appendix C.
