Gestetner 3560DNP, Operating Instructions Manual

Page: 94 / 150

User Tools
76
3
9 Idling for
Q.Mode You can specify the number of times that the drum unit idles
when in Quality Start mode.
Note
❒
Default: 2
10 Setting Q.Mode You can select “Yes” to have the machine automatically carry out
a few idle spins when the power is turned on. If Auto Quality
Start mode is set to “No”, you can restore the density by making
a few extra prints or by using the Manual Quality Start mode.
Note
❒
Default: Yes
11 No. of Q.Start You can specify the number of times that the drum idles when in
Auto Quality Start mode.
To increase the print image density, increase the number of drum
rotations.
Note
❒
Default: See p.80 “4-14 No. of Q.Start”
Reference
To change the number of idle spins, see p.80 “4-14 No. of
Q.Start”.
12 Memory Mode You can choose to have either Memory mode or Stack Memory
mode as the default.
Note
❒
Default: Normal (Memory mode)
13 Auto Class Under the Class mode, the machine stops after it is finished a
Class print job. When you select Auto Class, the machine stops
for 2 seconds and then goes on to the next Class print job.
Note
❒
Default: Stop
No. Mode Description