Gestetner 3560DNP Operating Instructions Manual Download Page 20

Page: 20 / 150

Machine Interior

Paper alignment wings

Lift or lower the wings according to the
type of paper used.

Paper delivery side plates

Use to align the prints on the paper deliv-
ery tray.

Paper delivery end plate

Use to align the leading edge of the
prints.

Paper delivery tray

Completed prints are delivered here.

Main switch

Use to turn the power on or off.

Drum unit

The master is wrapped around this unit.

Drum unit lock lever

Lift to unlock and pull out the drum unit.

Ink holder

Set the ink cartridge in this holder.

Exposure glass

Position originals face down on the expo-
sure glass.

10.

Master eject box

Used masters are stored here.

ZJVH030E

Summary of Contents for 3560DNP























































































































































Search results

Summary of Contents for 3560DNP

Reviews:

Related manuals for 3560DNP

Brands by name

Popular brands

Gestetner 3560DNP, Operating Instructions Manual

Search results

Summary of Contents for 3560DNP

Reviews:

Related manuals for 3560DNP

Brands by name

Popular brands