Gestetner 3560DNP Operating Instructions Manual Download Page 114

Page: 114 / 150

Troubleshooting

• Thin and flimsy originals
• Originals with index tabs
• Transparent originals such as OHP transparencies or translucent paper

Note

❒

You cannot place originals of different sizes at the same time.

❒

Remove staples or clips from the originals, and then fan the originals lightly.

❒

Do not stack originals above the limit mark.

When “

” lights and “A” is indicated

A paper misfeed has occurred in the paper feed section.

CAUTION:

AAAA

Slowly but firmly pull out the paper.

BBBB

If the indicators remain lit, open the front door and close it firmly.

Reference

See p.99 “To prevent paper misfeeds”.

•

Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.

ZFRY010E

Summary of Contents for 3560DNP























































































































































Search results

Summary of Contents for 3560DNP

Reviews:

Related manuals for 3560DNP

Brands by name

Popular brands

Gestetner 3560DNP, Operating Instructions Manual

Search results

Summary of Contents for 3560DNP

Reviews:

Related manuals for 3560DNP

Brands by name

Popular brands