Administrator Mode
125
4
[Storage Settings]
Enable recycling:
If the
Enable recycling
option is selected, when the space of the
storage device is lower than the specified space, the system will either write the data to
another device or overwrite the oldest recorded files. If the
Enable recycling
option is
not selected, the system will stop recording when the specified space is reached.
Keep days (1-255):
Specify the number of days to keep the files from 1 day to 255
days. When both
Keep days
and
Enable recycling
are selected, the system applies
whichever condition comes first. For example, if the specified smallest amount of
storage space comes earlier than the designated keep days, then recycle is applied
first.
Enable debug message to the storage:
Debug message (see
4.8.4 Log Information
)
is deleted after reboot. Select this option to store log information to the attached
storage device.
Enable auto formatting when disk or partition is enable to record:
Select this
option for the camera to automatically format the storage device when there is error
during recording.
[Network Neighborhood Settings – Coming]
With future firmware version
, you can record your GV-Fisheye Camera to a connected
NAS server.
Note:
1. Make sure your camera’s video settings adhere to the following:
VBR is set to
Good
Maximal Bit Rate is set to the following:
Camera Type
Max. Bit Rate
1.3 M
6 Mbit or lower
2 MP / 3 MP / 4 MP / 5 MP
8 Mbit or lower
2. For optimal performance and compatibility, it is highly recommended to use a GV-NAS
System.
3. It is highly recommended that the NAS server supports quota function, and a separate
quota is allocated to each camera.
