manualshive.com logo in svg

GeoVision GV-Fisheye, User Manual, Page: 172 / 209

Share
Download
GeoVision GV-Fisheye User Manual Download Page 172

 

 

158 

6.6  Downloading Videos from the Micro SD Card  

When connections of GV-IP Cameras to the GV-System are lost, recordings are 
automatically saved to the memory cards inserted in the GV-IP Cameras. To automatically 
synchronize and download recordings from the micro SD cards to a local folder, install and 
execute the 

GV-SDCardSync Utility

 program. 

 

Note: 

GV-SDSyncCard Utility is only supported in GV-System V8.5.4 or later and in GV-

IPCam H.264 V1.11 or later.

 

 

 

6.6.1  Installing the GV-SDCardSync Utility 

1. Download the 

GV-SD Card Sync Utility

 program from  

http://ftp.geovision.tw/FTP/neo/Utility/GvSDCardSync_Setup.zip

 

 

Note:

 The GV-SD Card Sync Utility must be installed on the computer installed with     

GV-System V8.5.4 or later.

 

 

2. Execute the 

GV-SDCard Sync Utility

 program. The main window and the Setting 

window appear. The Setting window pops up automatically upon first execution. 

Otherwise, click the 

Setting

 button 

. 

 

          Figure 6-16

 

Summary of Contents for GV-Fisheye


















































































































































































































Reviews:

No comments