GeoVision GV-Fisheye User Manual Download Page 3

Page: 3 / 209

Preface

Welcome to the

GV-Fisheye IP Camera User’s Manual

The GV-Fisheye IP Camera has the following models with different resolutions. This Manual

is designed for the following models and firmware versions:

Model

Model Number

Firmware Version

GV-FE421

GV-FE521

GV-FE2301

GV-FE4301

GV-FE2302

GV-FE3402/ 3403

Fisheye Camera

GV-FE5302/ 5303

GV-FER3402 / 3403

GV-FER521

Fisheye Rugged Camera

GV-FER5302 / 5303

V3.0

Note:

1. To upgrade the camera firmware from V2.07 or earlier to the latest version, back up the

files in the camera’s memory card first before the upgrade and it is required to re-format
the memory card after the upgrade.

2. With future firmware version, GV-Fisheye IP Camera shall support recording to NAS

devices using the Network Neighborhood settings.

Summary of Contents for GV-Fisheye


















































































































































































































Search results

Summary of Contents for GV-Fisheye

Reviews:

Related manuals for GV-Fisheye

Brands by name

Popular brands

GeoVision GV-Fisheye, User Manual

Search results

Summary of Contents for GV-Fisheye

Reviews:

Related manuals for GV-Fisheye

Brands by name

Popular brands