B. Gohl
©
GEOSAT
pro
18
II-2. Motor Setup
1.
Motor Type
USALS is preferred
- Press OK to display DiSEqC 1.2 / USALS
- Select the motor control method. Press OK
- If USALS, Press GREEN button and enter
the install location Longitude and Latitude.
2.
Satellite
- Press OK to list preprogrammed satellites
- Select the desired satellite. Press OK
3.
Switch & LNBF
- Press OK to display switch / LNBF setups
- Change settings as needed. Press OK
4.
TP Frequency
- Press OK to list programmed transponders
- Select an active transponder. Press OK
5.
Motor Movement
- Press Navigate LEFT/RIGHT arrow to
move or bump the dish position East or West
6.
Motor Control
- Press Navigate LEFT/RIGHT arrow to:
Store Sat Position: Stores current position
Goto Sat Position: Moves to stored position
Goto 0: Moves to motor 0 position
Reset Position: Resets motor stored settings
- Press OK to execute command
7.
Satellite Position
- Modify if preprogrammed satellite longitude
position is incorrect.
8.
Search Options
- Press OK to display list of Search Types
- Select the desired search type. Press OK
See description on page 17
9.
Search
- If Signal Quality meter is displaying
Quality, Press OK to scan for channels.
Channel Search Completed - Press OK to save.
8.
LNB Power
- Press OK to display list ON / OFF
- Select if to provide LNB power. Press OK
9.
Search
- If Signal Quality meter is displaying
Quality, Press OK to scan for channels.
Channel Search Completed - Press OK to save.
II-1. Channel Search - cont.
