www.geosatpro.com
Toll Free 888-483-4673
19
1.
Press RED button to exit - no modification
2.
Press Green button to add a transponder
3.
Press YELLOW to delete a transponder
4.
Press BLUE to manually add a channel
when PIDs are available.
5.
Press EXIT when completed. Press OK to
save changes or highlight CANCEL and
then press OK.
II-1 & 2.b Transponder Edit
II-1 & 2.c Blind Scan
Note: The Signal Quality will not be initially displayed when Blind Scan Option is
selected. Quality will be displayed as the receiver locates active transponders.
1.
Freq Step
- Press OK to list 2, 4, 6, 8, 10MHz steps
- Select the step size. Press OK
Small steps provide detailed scans. Find more / takes longer
2.
Symbol Rate
- Press OK to list SR ranges: ALL, <8000,
>8000, 8000 - 4000, <4000, >4000
- Select the desired range. Press OK
3.
Polarity
- Press OK to list All, Hor, Ver polarity
- Select the desired polarity. Press OK
4.
Start Frequency
- Enter start IF between 950 - 2150MHz
The satellite tuner will scan the entire range unless modified.
If Blind Scanning with a Standard LNB LO, leave at 950
5.
End Frequency
- Enter stop IF between 950 - 2150MHz
Standard LNB enter 1450 / Universal LNB enter 2150
6.
Search Options
See description on page 17
7.
Search
- Press OK to scan for new transponders and
channels. The process may take an extended
time if searching a wide range of parameters.
