B. Gohl
©
GEOSAT
pro
38
The Universal Post Mount can be assembled
for flat and pitched roof or wall type
installations. The post has two slots for
attaching to the Foot Plate on both ends of the
tube. This allows the dish to be mounted in
one of two methods. Either with the “J” at the
bottom of the post providing a higher reach
(as pictured), or the “J” is positioned at the
top of the post for greater outward reach.
Mount the Universal Post Mount Foot Plate to
a wall stud or roof rafter using two 5/16th x 3”
lag bolts. Additional 5/16th x 2” lag bolts on the
outer edges will increase stability. To prevent
water leakage, use the included silicone sealant
or other waterproofing product on all wall or roof
penetrations.
Universal Post Mount Assembly
The unique slots in the post tube
allows the post to be leveled or made
plumb in almost any installation
position.
If the post is not exactly plumb, the
elevation scale will not be accurate
and it will be very difficult to locate
the satellite and properly tune the
dish for reliable reception.
Insert the Bubble Spirit Level into the top
of the post. Be sure that the level is seated
level and flush with the top edge of the
post.
Level and Secure Post
