B. Gohl
©
GEOSAT
pro
14
View Signal Level and Signal Quality
a)
Press the SIGNAL button to display a meter
which shows Signal Level and Quality.
A Signal Level above 5% will indicate that a working
LNB is connected. The Signal Quality indicates the
reception of the selected satellite and transponder. This
advanced meter features a 10 bar graphic display of
Signal Quality sampled in .5 second intervals with a
5 second history. A high Signal Quality Reading with
minimal ripple in the bar graph indicates optimal dish
aiming and LNB placement.
b)
Press SIGNAL to exit the meter display.
Signal Meter
Event Timer
Manual Event Timer Setup
a)
Press TIMER button.
Number: Select event 1 - 10
Enable: Select YES to enable
Type: Select Once, Daily, Weekly
Channel: Select a TV or Radio channel
Month: Select month of the event
Date: Select the date of the event
Start: Enter the start time in 24 hour
mode. Example: Midnight is 00:00, 1:30pm
is set as 13:30.
•
•
•
•
•
•
•
Duration: Enter the length of the event.
Entering 00:00 will cause the receiver to
tune the channel, but not record
•
Event Timer -
DVR1100c
DVR1100c
DSR200c
