Genie GS-2669 IC, Service And Repair Manual

Page: 99 / 171

May 2022 Service and Repair Manual
Steer Axle Components
Part No. 1306516GT GS ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT 85
12-5
Oscillate Hoses
Test the Oscillate Axle Hose
Routing
Note: Perform this procedure if the oscillate hoses
have been removed or replaced.
1 Open the ground controls compartment and
locate the function manifold.
1 function manifold
2 Tag and disconnect the connector with the
red wire from the oscillate left coil (item A)
and the connector with the white wire from the
oscillate right coil (item B) and set aside.
Refer to illustration 2.
illustration 2
3 Tag and disconnect the connector with the
blue wire from the steer right coil (item C).
Connect it to the oscillate right coil (item B).
Refer to illustration 2.
4 Tag and disconnect the connector with the
blue/black wire from the steer left coil (item
D). Connect it to the oscillate left coil (item A).
Refer to illustration 2.
5 Turn the key switch to platform controls and
pull out the red Emergency stop buttons to the
on position at both the ground and platform
controls. Start the engine.
Note: During this procedure a fault code 64 will
appear on the ground controls display.