Genie GS-2669 IC, Service And Repair Manual

Page: 57 / 171

May 2022 Service and Repair Manual
Kubota WG972 Engine
Part No. 1306516GT GS ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT 43
4 Loosen the lock nut on the high idle
adjustment nut.
5 Turn the high idle adjustment nut
counterclockwise until the adjustment nut is
flush against the solenoid.
6 Turn the lock nut against the adjustment nut.
Do not tighten.
7 Hold the throttle lever against the low idle
adjustment screw and turn the adjustment
screw clockwise to increase rpm or
counterclockwise to decrease rpm.
8 While holding the throttle lever against the low
idle adjustment screw, tighten the core clamp
screw.
9 Push the engine idle control button to high
idle (rabbit symbol) from the ground controls.
10 Hold the start toggle switch to the start
position and check the engine RPM on the
diagnostic display. Refer to Specifications,
Engine Specifications
.
11 To correct the high idle speed, loosen the lock
nut on the high idle adjustment nut, turn the
high idle adjustment nut clockwise to increase
the rpm or counterclockwise to decrease the
rpm. Tighten the lock nut and confirm the rpm.
Note: Be sure the solenoid fully retracts when
activating high idle.
5-7
How to Repair the Kubota WG972
Engine
Repair procedures and additional engine
information are available in the Kubota Operator's
and Workshop Manuals.
Kubota - WG972 Operator's Manual
Genie part number
234803
Kubota - WG972 Workshop Manual
Genie part number
234802