Genie GS-2669 IC, Service And Repair Manual

Page: 16 / 171

Service and Repair Manual May 2022
Specifications
2 GS ™ -2669 RT • GS ™ -3369 RT • GS ™ -4069 RT Part No. 1306516GT
Performance Specifications
Drive speed, maximum
Platform stowed
High speed
3.5 mph
5.6 km/h
40 ft / 7.8 sec
12.2 m / 7.8 sec
Platform stowed
High torque
0.9 mph
1.4 km/h
40 ft / 30 sec
12.2 m / 30 sec
Platform raised 0.3 mph
0.48 km/h
40 ft / 91 sec
12.2 m / 91 sec
Braking distance, maximum
High range on paved
surface
less than 2 ft
less than 0.6 m
Gradeability
See Operator's Manual
Function speed, maximum from platform controls
(with maximum rated load in platform)
GS-2669 RT
Platform up
Platform down
29 to 39 seconds
26 to 36 seconds
GS-3369 RT
Platform up
Platform down
34 to 44 seconds
24 to 34 seconds
GS-4069 RT
Platform up
Platform down
56 to 66 seconds
26 to 36 seconds
Outrigger leveling, maximum
Front
Back
Side to side
5.3°
4.2°
11.7°
Hydraulic Oil Specifications
Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation prevention, corrosion inhibition, seal
conditioning, and foam and aeration suppression
properties.
Cleanliness level,
minimum
ISO 15/13
Water content,
maximum
250 ppm
Recommended Hydraulic Fluid
Hydraulic oil type
Chevron Rando HD Premium
Viscosity grade 32
Viscosity index 200
Optional Hydraulic Fluids
Mineral based Shell Tellus S2 V 32
Shell Tellus S2 V 46
Shell Tellus S4 VX 32
Shell Donax TG (Dexron III)
Chevron 5606A
Biodegradable Petro Canada Environ MV 46
Fire resistant UCON Hydrolube HP-5046
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult Genie
Product Support before use.
Optional fluids may not have
the same hydraulic lifespan and
may result in component
damage.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond its
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.