Introduction & Specifications
Technical Specifications
076R174-000
SpectraComm SDT
1-9
Issue 4
Installation and Operation Manual
Technical Specifications
The following tables describes the physical, operational, and environmental specifications for the
SpectraComm SDT. Conforming to these specifications ensures maximum system performance and
reduces the chances of mechanical breakdown and personnel hazard.
Table 1-2
Technical Specifications
Specification
Description
Detail
Physical
Characteristics
SC-SDT Device
Width: 178 mm (7.0 in.)
Height: 21 mm (0.81 in.)
Depth: 241 mm (9.5 in.)
Weight: 0.28 kg (10 oz.)
Electrical
Characteristics
Power Requirements
AC or DC power, according to your SpectraComm shelf
configuration.
Voltage/Frequency
Refer to the appropriate SpectraComm Shelf Manual.
Fusing
Refer to the appropriate SpectraComm Shelf Manual.
Power Dissipation
5 Watts maximum
Operational
Characteristics
Data Rates
Maximum full-duplex data rate on each sync port of 2.048
Mbps
Environment
Non-Operating
Temperature: -40 to 70 degrees C (-40 to 158 degrees F)
Relative Humidity: 5% to 95%
Altitude: up to 12,191 m (40,000 ft)
Operating
Temperature: 0 to 50 degrees C (32 to 122 degrees F)
Relative Humidity: 5% - 90% non-condensing
Altitude: -60 to 4,000 m (-197 to 13,123 ft)
Management
Command Line Interface
Terminal and Telnet command line interface (CLI)
HTTP Interface
Web-based CLI via embedded web-server
(requires web browser)
SNMP
SNMP support for discovery, statistics alarm traps, and
MIB2 (RFC 1213)
Supported
Protocols
Ethernet
ANSI/IEEE 802.3; Rates: 10/100Base-T;
Supports HP auto-sense MDI/X
Authentication
Local Authentication
Authentication Protocol Version1.78 (CISCO)
Interfaces
Synchronous Interface
RS232, V.35, EIA-530, X.21, 530A, RS449
Compliance
Vibration
Designed to be compliant with GR-63-Core, Section 4.4.4 and
Section 4.4.3
Shock
Designed to be compliant with GR-63-Core, Section 4.3 for
Category “A” and Category “B“ Containers.
NEBS Level III
designed to be compliant with GR-1089-Core, GR-63-Core,
GR-78-Core
EMI
FCC Part 15 Class A, ICES 003 Class A
Quality Assurance
The MTBF reliability shall be greater than 150,000 hours per
BELLCORE TR-232.
Summary of Contents for SpectraComm SDT
Page 73: ......
