The Web Interface
Introduction to Web Management
4-2
SpectraComm SDT
076R174-000
Installation and Operation Manual
Issue 4
Starting A Web Session
This release of the SC-SDT provides the web-based Command Line Interface. To start a web
management session, type the IP address of a SC-SDT unit or type the host name at any browser.
The following login authorization screen appears:
User Name and Password
The SC-SDT web interface is protected by pre-configured user names, passwords and the
associated access privileges as assigned by an Administrator. A valid password can be up to 20
alphanumeric characters. If three consecutive invalid passwords are entered, a temporary lock-out
will occur.
Access Modes
Access modes configured by the Administrator determines whether a user name has Read-only or
Read-Write privileges to the SC-SDT web screens.
•
User Mode
(Read Only access)
•
Supervisor Mode
(Read/Write access permits data entry and configuration changes.)
•
Admin Mode - Access Denied
(Admin commands must be entered via Telnet or Craft interface.)
Note
Access will be denied to any user or supervisor if there are already eight web sessions in progress.
SpectraComm SDT
Username:
Password:
Supervisor password:
(optional)
Login
Summary of Contents for SpectraComm SDT
Page 73: ......
