Genelec GLM 4 System Operating Manual Download Page 12

Page: 12 / 87

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual

page 12 of 87

4.2.3 Analog Stereo with a Subwoofer

Before cabling, turn off the power in all monitors and subwoofers.



connect (Left) audio cable from the source to the subwoofer connector ANALOG IN 1.



connect a cable from subwoofer ANALOG OUT 1 to left monitor ANALOG IN.



connect (Right) audio cable from audio source to subwoofer ANALOG IN 2.



connect (Right) audio cable from Subwoofer ANALOG OUT 2 to right monitor ANALOG IN

Figure 4. Analog stereo cabling with a subwoofer

4.2.4 Analog 5.1 Surround

Before cabling, turn off the power in all monitors and subwoofers.



connect an audio cable from the audio source to the subwoofer ANALOG IN 1



continue from the subwoofer ANALOG OUT 1 to the monitor ANALOG IN



continue connecting all remaining audio input cables to the subwoofer inputs ANALOG IN 2

through to ANALOG IN 5, and from the respective analog outputs to the relevant monitors



finally, connect the LFE channel from the audio source to the subwoofer LFE IN

Summary of Contents for GLM 4
























































































Search results

Summary of Contents for GLM 4

Reviews:

Related manuals for GLM 4

Brands by name

Popular brands

Genelec GLM 4, System Operating Manual

Search results

Summary of Contents for GLM 4

Reviews:

Related manuals for GLM 4

Brands by name

Popular brands