V 10/17
MagicCompact BA04
Maintenance
•
27
Maintenance
Maintenance and repair
Daily or after each shift
–
Blow off the powder hoses
–
Clean the guns externally and the check wearing parts
–
Check the vibrating sieve of the cyclone separator and clear away
contamination with an industrial vacuum cleaner
Weekly
(in single-shift works, or in each fifth shift in multi-shift works)
–
Check the clean air chamber in the After Filter housing for powder
deposits through the inspection window of the filter housing above
the door. If powder deposits are present, this is an indication of de-
fect filter elements (replace the filter elements, see After Filter oper-
ating instructions).
–
Check all oil separators and if necessary, empty (if oil is present, the
compressed air preparation must be checked)
Biannually
–
Disconnect the measuring lines of the pressure gauges on the ma-
nometer, and blow it off from the manometer to the measuring point
(beginning of the line) - Definition of the lines: H = high, L = low)
NOTE:
The indicated blowing direction is absolutely to be observed!
The parts to be replaced during maintenance are available as spare
parts, see also the spare parts list!
