V 10/17
16
•
Design and function
MagicCompact BA04
Exhaust air system with After Filter
An efficient exhaust air system is used to keep the area around the booth
clean and to prevent explosive powder/air mixtures. The exhaust air is
created by the fan in the After Filter.
Detailed information about the After Filter is found in the corresponding
operating manual.
Fire protection
For safety reasons, it is recommended to equip the plant with a CO
2
fire
extinguishing system. An existing fire protection is merged in the security
concept of the plant and assumes the plant interlocking release.
Cleaning operation mode
During the automatic gun cleaning, the work piece entrance or exit door is
closed, thereby an increased air inlet speed results at the remaining
openings at the booth.
This ensures a dust-free environment around the booth during the color
change procedure.
Automatic booth cleaning
The cleaning of the booth floor takes place automatically with the combi-
nation of the floor blow-off system and the powder suction (see the chap-
ter on "Booth – Basement")
Powder recovery
A safe and clean powder recovery is ensured by following components:
–
Cyclone separator
–
Sieve machine
–
Dense phase conveyor
–
OptiCenter
The powder which does not adhere on the workpiece (overspray) is fed
from the suction opening, through a conduction, to the cyclone intake.
The powder is separated in the cyclone and then sieved in the sieve ma-
chine. The recovered powder is fed back to the OptiCenter.
NOTE:
Further information about the powder recovery components you will
find in the corresponding user manuals!
