V 10/17
6
•
General safety regulations
MagicCompact BA04
powder coating booth should only be used, maintained and started
up by trained personnel, who are informed about and are familiar
with the possible hazards involved.
–
Start-up (i.e. the execution of a particular operation) is forbidden until
it has been established that the powder coating booth has been set
up and wired according to the guidelines for machinery (2006/42
EG). EN 60204-1 (machine safety) must also be observed.
–
Unauthorized modifications to the powder coating booth exempts the
manufacturer from any liability from resulting damage.
–
The relevant accident prevention regulations, as well as other gen-
erally recognized safety regulations, occupational health and struc-
tural regulations are to be observed.
–
Furthermore, the country-specific safety regulations also must be
observed.
Explosion protection
Protection type
II 3D
IP54
Product-specific safety measures
General information
The MagicCompact BA04 powder coating booth is a constituent part of
the equipment and is therefore integrated in the system's safety concept.
If it is to be used in a manner outside the scope of the safety concept,
then corresponding measures must be taken.
NOTE:
For further information, see the more detailed Gema safety regula-
tions!
Installation
–
Installation work performed by the customer must be carried out ac-
cording to local regulations.
–
Before starting up the plant a check must be made that no foreign
objects are in the booth or in the ducting (input and exhaust air)
–
All components must be grounded according to the local regulations
before start-up.
–
The ground connection of the booth should be checked each time
the equipment is put into operation. The ground must be connected
by the customer to the base of the booth, Multi- cyclone, and filter
housing(s). Also make sure that the workpieces, and all other sys-
tems are properly grounded
