50960066/AP0813
22
PRINTED IN U.S.A.
F - Turn Signal:
This switch is used to indicate the
direction of a turn with the tail lights. Press the right
arrow for a right turn; press the left arrow for a left
turn. Return the switch to the center position after the
turn is completed.
G - Hazard:
This switch can be activated to make the
tail lights flash on and off in case the machine is stalled
or temporarily stopped in a traffic area on the road or
jobsite.
H - Strobe:
When a beacon is installed on the machine,
activating this switch will produce a strobe-light on
and off flashing, for working in conditions that may
obscure view of the machine.
Bottom Row Switches
Switches have graphic symbols to indicate function
and effect. The following mode descriptions start with
the first switch on the left.
NOTE:
Some switches are optional and may not
be on machine.
I and J - Wiper/Washer:
The windshield and top win-
dow of the operator’s station are each equipped with a
wiper and washer mechanism. The left switch (I) oper-
ates the wiper and washer on the windshield; the sec-
ond switch (J) operates the wiper and washer on the top
window.
K and L - Blank
Heater Controls
Temperature Control:
This is the upper knob located
to the left of the steering wheel. This knob is used to
adjust the temperature output of the cab heater. Turning
the knob clockwise will increase the temperature out-
put.
Fan Speed:
This knob is located below the tempera-
ture control knob. Rotating the knob clockwise will
increase the fan speed for increased air circulation.
Heater A/C Controls
Fan Speed:
This is the upper knob located to the left
of the steering wheel. The fan is in the off position
when the knob is rotated completely to the left.
Rotating the knob clockwise will switch the fan on and
increase the fan speed for increased air circulation.
Temperature Control:
This knob is located below the
fan speed knob. It is used to adjust the temperature out-
put of the heater A/C unit. Turning the knob clockwise
from the midpoint position will increase the tempera-
ture output of the cab heater. Turning the knob counter-
clockwise from the midpoint position will switch the
A/C unit on and decrease the temperature output of the
cab A/C.
Travel Lever
Located on the left side of the steering wheel column,
this lever is used to change travel direction (forward or
reverse).
Position
“F”
(FORWARD)
Position
“N”
(NEUTRAL)
Position
“R”
(REVERSE)
Fan Speed Knob
Temperature
Control Knob
I
J
K
L
Fan Speed
Knob
Temperature
Control Knob
Summary of Contents for RS5-19
