PRINTED IN U.S.A.
5
50960066/AP0813
Chapter 3
CHECKLISTS
PRE-DELIVERY
The following Checklist is an important reminder of inspec-
tions that MUST be made before delivering the Telescopic
Handler to the customer. Check off each item after the pre-
scribed action is taken.
√
Check that:
q
NO parts of machine have been damaged in shipment.
Check for such things as dents and loose or missing parts;
correct or replace components as required.
q
Battery is securely mounted and not cracked. Cable con-
nections are tight. Electrolyte at proper level.
q
Cylinders, hoses and fittings are not damaged, leaking or
loosely secured.
q
Oil, fuel and air filters are not damaged, leaking or loosely
secured.
q
All grease fittings have been properly lubricated and no fit-
tings are missing; see Lubrication chapter of this manual.
q
Wheel nuts are torqued to 450 ft.-lbs. (610 Nm).
q
Tires are inflated to 65 psi (448 kPa) cold.
q
Hydraulic system reservoir, engine crankcase, engine
coolant, transmission and axles are filled to the proper
operating fluid levels.
q
All adjustments have been made to comply with the set-
tings given in this manual and in the separate engine man-
ual.
q
All guards, shields and decals are in place and securely
attached.
q
Model and serial numbers for this unit are recorded in
space provided on this page and page 1.
√
Check that:
q
All indicators (lamps, switches, etc.) function properly.
q
All hand and foot controls operate properly.
q
Boom, Quick-attach System with attachment tool all func-
tion properly.
q
No hydraulic system leaks when under pressure.
q
Listen for abnormal noises or vibrations; if detected, deter-
mine their cause and repair as necessary.
I acknowledge that the pre-delivery procedures were per-
formed on this unit as outlined above.
Dealership’s Name
Dealer Representative’s Name
Date Checklist Filled Out
Machine Model # Machine Serial # Engine Serial #
DELIVERY
√
Check that:
The following Checklist is an important reminder of valu-
able information that MUST be passed on to the customer at
the time the unit is delivered. Check off each item as you
explain it to the customer.
q
Review with the customer the contents of this manual and
the AEM Safety Manual and for the following:
q
The
Index
at the back, for quickly locating topics;
q
The Safety, Indicators and Controls, and Operation and
Adjustments chapters for information regarding safe use of
the machine.
q
The Lubrication, Service and Storage, and Maintenance
chapters for information regarding proper maintenance of
the machine. Explain that regular lubrication and mainte-
nance are required for continued safe operation and long
life.
q
Give this Operator’s Manual and the AEM Safety Manual
to the customer and instruct them to be sure to read and
completely understand their contents BEFORE operating
the unit.
q
Remind the customer of U.S. OSHA regulation 1910.178
(l), which specifies operator training requirements.
q
Explain that the customer must consult the engine manual
(provided) for related specifications, operating adjustments
and maintenance instructions.
q
Completely fill out the Owner’s Registration, including
customer’s signature, and return it to the Company.
Customer’s Signature
Date Delivered
Start the machine and test-run the unit while
checking that proper operation is exhibited by all
controls.
(Dealer’s File Copy - Remove at Perforation)
Summary of Contents for RS5-19
