![background image](http://html1.mh-extra.com/html/gehl/rs5-19/rs5-19_operators-manual_2205883035.webp)
PRINTED IN U.S.A.
33
50960066/AP0813
Detaching
To detach attachment tool, proceed as follows:
1. Raise the boom slightly and extend it 2 to 3 feet
(600-900 mm) for better visibility. Lower the
boom until the attachment tool is approximately
12” (300 mm) off the ground.
2. Roll the carrier rearward as far as it will go. When
the carrier is rolled all the way back, perform the
Mandatory Safety Shutdown Procedure (p. 8,
Safety chapter).
3. With the engine off, leave the operator’s station.
Manually raise the lock spring, and flip the lock
plate up and outward at least 180
°
so it is in posi-
tion to re-lock on the next attachment tool.
4. Tilt the Quick-attach System forward to allow the
attachment tool to roll out, then lower the boom so
the hook ears clear the hookup bar on the attach-
ment tool.
NOTE:
One side of the lock plate has a bright red
decal to indicate the unlocked position.
5. If the attachment tool has auxiliary hydraulics, dis-
connect the hoses from the quick-disconnects on
the boom nose.
6. Start the engine and tilt the Quick-attach System
forward, then slowly back the machine until the
attachment tool is free from the boom nose.
SELF-LEVELING
The machine is equipped with a hydraulic self-leveling
feature. This feature is designed to keep the attachment
tool level while the boom is being raised and lowered.
GENERAL MACHINE OPERATION
Check the Telescopic Handler to be sure all systems
are in good operating condition. Perform the following
steps before starting the machine the first time each
day:
1. Check the engine oil, coolant and hydraulic oil lev-
els.
2. Check hydraulic oil cooler and engine radiator for
debris.
3. Be sure weekly lubrication has been done.
4. Visually inspect for leaks and broken or malfunc-
tioning parts. Be sure all caps, covers and safety
shields are in place.
5. Check tires for cuts, bulges, nails, correct pressure,
loose wheel nuts, etc.
WARNING
Modifications, alterations to, or use of attach-
ment tools not authorized by Gehl (or the man-
ufacturer) in writing can void warranty and
cause machine damage and/or serious per-
sonal injury or death.
Attachment Tool Shown Locked
to Quick-attach System
Attachment Tool Shown
Unlocked for Release from
Quick-attach System
Quick-attach System Attaching Detail
Quick-attach System Detaching Detail
Summary of Contents for RS5-19
