PRINTED IN U.S.A.
13
50960066/AP0813
SAFETY
Ü
DO NOT loosen or disconnect any hydraulic lines,
hoses or fittings without first relieving hydraulic
circuit pressure. Also, be careful not to touch any
hydraulic components that have been in recent
operation because they can be extremely hot and
can burn you!
Ü
Avoid lubrication or mechanical adjustments with
the machine in motion or the engine running. If the
engine must be running to make certain adjust-
ments, place the equipment in a safe position,
place the transmission in neutral, apply the parking
brake, securely block the wheels and use extreme
caution.
Ü
To ensure continued safe operation, replace dam-
aged or worn-out parts with genuine Gehl service
parts before using this equipment.
Modifications, Nameplates, Markings and
Capacities
Ü
Modifications and additions that affect capacity or
safe operation must never be performed without
the manufacturer’s prior written approval. Where
such authorization is granted, any applicable mark-
ings are to be changed accordingly.
Ü
All attachment tools MUST be marked to identify
the attachment tool and the total capacity with the
attachment tool at maximum elevation with the
load laterally centered.
Ü
ALWAYS be sure all nameplates, warnings and
instruction markings are in place and legible.
Local government regulations may require specif-
ic decals, which are the responsibility of the owner
to provide.
Safety Guards and Warning Devices
Ü
This machine is fitted with a Roll-Over Protective
Structure (ROPS) and Falling Object Protective
Structure (FOPS) in accordance with industry stan-
dards. The structure is intended to offer protection
to the operator in case of an overturn and from
falling objects, but it cannot protect against every
possible hazard. Therefore it should not be consid-
ered a substitute for good judgment and safe prac-
tices in operating the machine. If the ROPS / FOPS
structure is damaged, it must be replaced to restore
the protection it provides.
Ü
This machine is equipped with a horn and backup
alarm. The user must determine if operating condi-
tions require the machine to be equipped with
additional devices (mirrors, rotating beacon, etc.)
and be responsible for providing and maintaining
such devices.
Summary of Contents for RS5-19
