PRINTED IN U.S.A.
35
913225/CP0807
EXTENDING THE HEAD REST (FIG. E)
- The height of the back rest can be adjusted by
pulling it upwards (the notches will click) up to the
stop.
- The head-rest can be removed by applying sufficient
pressure to pull it off the stop.
LUMBAR ADJUSTMENT (FIG. F)
This increases the comfort of the seat and the opera-
tor’s freedom of movement.
- Turn the handle either left or right to adjust the
height or depth of the lumbar support.
ADJUSTMENT OF THE ANGLE OF THE BACK-
REST (FIG. G)
- Support the back rest, pull the lever and position the
back-rest to find the desired position.
LONGITUDINAL ADJUSTMENT (FIG. H)
- Adjust the locking lever until you reach the position
required. This then locks and the seat will not shift
into another position.
MAINTENANCE (FIG. I)
Dirt may adversely affect the correct functioning of the
seat. For this reason, make sure your seat is always
clean.
- To clean or change the cushions, simply remove
them from the seat frame.
Avoid wetting the cushion fabric when cleaning.
Check the resistance of the fabric on a small hidden
area before using any fabric or plastic cleaner.
WARNING
Support the back rest when making adjust-
ments to prevent it from swinging completely
forward.
