913225/CP0807
34
PRINTED IN U.S.A.
NOTE:
All terms such as: RIGHT, LEFT, FRONT,
REAR are meant for an observer seated in the
operator’s seat and looking forward.
1 - OPERATOR’S SEAT - CT5-16
Designed for maximum comfort, this seat can be
adjusted as follows:
LONGITUDINAL ADJUSTMENT
- Pull locking lever (1) towards the right.
- Slide the seat to the required position.
- Release the lever and be sure it returns to the lock
position.
SEAT SUSPENSION ADJUSTMENT
- Refer to the seat's graduation.
- Turn handle (2) depending on the operator's weight.
ADJUSTMENT OF THE ANGLE OF THE BACK-
REST
- Pull locking lever (3) upwards.
- Slide the back-rest to the required position.
- Release the lever and be sure it returns to the lock
position.
1 - OPERATOR’S SEAT - CT5-16
TURBO
Designed for maximum comfort, this seat can be
adjusted as follows.
WEIGHT ADJUSTMENT (FIG. A)
It is recommended that the weight be adjusted when
the operator is not sitting in the seat.
- Refer to graduation (1) of the seat.
- Turn handle (2) according to the operator’s weight.
NOTE:
It is recommended that the weight should
be checked and adjusted before starting the tele-
scopic handler.
SEAT HEIGHT ADJUSTMENT (FIG. B)
Raise the seat to the desired position, until you hear the
ratchet click. If you raise the seat above the last notch
(stop), the seat drops down to the lowest position.
SEAT BACKREST ANGLE ADJUSTMENT (FIG. C)
The backrest angle of the seat may be adjusted to suit
the individual.
- Press the left-hand button while pushing on the seat
or relaxing pressure on the seat to find a comfortable
position.
SEAT DEPTH ADJUSTMENT (FIG. D)
The depth of the seat may be adjusted to suit the indi-
vidual.
- Press the right-hand button while raising or lowering
the seat to find the desired position.
1
2
