913225/CP0807
10
PRINTED IN U.S.A.
HYDRAULIC CIRCUIT
Type of pump
Gear pump with flow divider
Capacity
2.25 cu. in. (37 cm
3
)
Pump flow rate
23 gpm (87 L/min)
Pressure
Lifting, tilting, telescoping, attachment circuit
3770 psi (260 bar)
Steering circuit
2030 psi (140 bar)
Filtration
Return
10 micron
Suction
125 micron
Travel speed (standard configuration on horizontal ground)
Forward, no load
16 mph (26 km/h)
Reverse, no load
16 mph (26 km/h)
Standard lift height
16’ 2” (4.93 m)
Rated capacity with standard attachment
5000 lbs. (2268 kg)
Load center
24” (610 mm)
Lifting times (boom retracted)
No load, lifting
6.0 seconds
Rated load, lifting
6.7 seconds
No load, lowering
4.0 seconds
Rated load, lowering
4.0 seconds
Telescoping times
No load, extending
4.5 seconds
Rated load, extending
4.6 seconds
No load, retracting
3.0 seconds
Rated load, retracting
2.4 seconds
Rearward tilt time, no load
2.7 seconds
Forward tilt time, no load
2.3 seconds
Operating weight with standard attachment
11856 lbs. (5378 kg)
Axle weight with attached equipment (transport position)
Front, no load
4998 lbs. (2267 kg)
Front, rated load
13982 lbs. (6342 kg)
Rear, no load
6272 lbs. (2845 kg)
Rear, rated load
2359 lbs. (1070 kg)
Drawbar pull, rated load
7644 lbf. (34.0 kN)
Breakout force on bucket teeth with tilt cylinder (ISO 14397-2)
10229 lbf. (45.5 kN)
CHARACTERISTICS
CT5-16 Turbo
FRONT AND REAR TIRES
DIMENSIONS
PRESSURE
TIRE LOAD
CONTACT SURFACE PRESS.
CONTACT SURFACE AREA
12.5/80X18 SGI 10PR
TUBELESS
46 PSI
FRONT NO LOAD
2535 lbs.
FRONT FULL LOAD
6945 lbs.
REAR NO LOAD
3086 lbs.
REAR FULL LOAD
1213 lbs.
21 lb./in.
2
41 lb./in.
2
25 lb./in.
2
11 lb./in.
2
172 in.
2
