gefran AFE200 4 Series, Instruction Manual, Page: 79 / 214

AFE200 • Instruction Manual
79
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.17 1066 Enable state mon BIT 16 0 0 1 R
The AFE Enable command status is displayed. Voltage must be present on terminal 7.
The FR Forwardstart command is needed to start the AFE200.
0
Disabled AFE disabled
1 Enabled AFE enabled
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.18 1100 Digital input mon UINT16 16 0 0 0 R
The status of the digital inputs on the AFE is displayed. It can also be read via a serial
line or fieldbus. The data are contained in a word, where each bit is 1 if voltage is sup -
plied to the corresponding input terminal.
0 Input disabled
1 Input enabled
I.e. :
000000000011
000000000011
Active DI 1 Active DI 2
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.19 1300 Digital output mon UINT16 0 0 0 R
The status of the digital outputs on the AFE is displayed. It can also be read via a se -
rial line or fieldbus. The data are contained in a word, where each bit is 1 if voltage is
supplied to the corresponding input terminal.
0
Output disabled
1 Output enabled
I.e. : 000000000011
000000000011
Active DO 1 Active DO 2
Menu PAR Description UM Type FB BIT Def Min Max Acc
1.20 1200 Digital input X mon UINT16 16 0 0 0 R
The status of the digital inputs of the expansion card is displayed. It can also be read
via a serial line or fieldbus. The data are contained in a word, where each bit is 1 if
voltage is supplied to the corresponding input terminal.
0 Input disabled
1 Input enabled
I.e. : 000000000011
000000000011
Active DI 1 Active DI 2