ADV200 • Quick start up guide - Specification and installation
77
8 - Parameters list
8.1 Legend
Menu
PAR
Description
UM
Type
FB BIT Def
Min
Max
Acc
Mod
1 - MONITOR
1.1 250
Output
current
A FLOAT
16/32
0.0
0.0 0.0 R FVS
1.2 252
Output
voltage
V FLOAT
16/32
0.0
0.0 0.0 R FVS
22.1 - FUNCTIONS/SPEED RATIO
FVS
22.1.1
3000 Dig speed ratio
perc
INT16
16/32 100
CALCI CALCI
ERW FVS
22.1.2
3002 Speed ratio src
LINK
16/32 3000
0
16384
ERW FVS
L_VREF
( Selection list )
[*]
( Level 1 menu )
( Level 2 menu )
Indexing of the menu and parameter
Parameter identifier
Parameter description
UM: unit of measure
Type of parameter
BIT
Boolean, from modbus seen as 16 bits
ENUM Selection list, from modbus seen as 16 bits
FLOAT Real, from modbus seen as 32 bits
FBM2SIPA 16-bit unsigned integer. Only PAR of existing param-
eters accepted.
FBS2MIPA 16-bit unsigned integer. Only PAR of existing param-
eters accepted.
INT16 Integer with sign 16 bits, from modbus seen as 16 bits
INT32 Integer with sign 32 bits, from modbus seen as 32 bits
ILINK Selection list, from modbus seen as 16 bits
LINK
Selection list, from modbus seen as 16 bits
UINT16 Integer without sign 16 bits , from modbus seen as 16 bits
UINT32 Integer without sign 32 bits, from modbus seen as 32 bits
Format of data exchanged on Fieldbus (16BIT, 32BIT)
Default value
CALCF Value calculated
as a number with
floating point
CALCI Value calcu-
lated as a whole
number
SIZE
Value depending
on the size of the
drive
Minimum value
Maximum value
Accessibility
:
E Expert
R Read
S Size (set value depending on the size of the device)
W Write
Z parameters that can be modified ONLY with the
drive disabled
Available in regulation mode:
V = V/f Control
S = Vect Flux OL
F = Vect Flux CL
[*]
Selection lists:
The “... src” format parameters are linked to a selection
list.
The source of the signal that will control the parameter
can be selected from the list indicated.
The lists are indicated in paragraph 8.5 of this manual.
