Gebwell Aries 12, Installation And Commissioning Manual

Page: 32 / 60

32 Aries Installation and Commissioning manual
Fill in Heating method and ID for heating circuits by
choosing from the drop-down menu.
Check that the information you entered is correct (you can
edit the information by choosing
Edit ).
Open device testing check list by choosing Execute
Execute the check-ups listed on device testing and mark
them done. Then choose
Quit.
Go to main menu and choose Settings and on settings
menu open Device management.
The device is on Stop as operationmode. Choose
Automatic as operation mode. In case there is a need to
run the heat pump before the collector is connected,
choose
Emergency operation as operation mode. In this
operation mode all the heat is produced by heat pump’s
electric heater using electicity.
Heat pump starts up and you can log out from the
application.