Gebwell Aries 12, Installation And Commissioning Manual

Page: 28 / 60

28 Aries Installation and Commissioning manual
11.4 Device identification
On device identification screen enter the serial number
(Device ID) of the Aries heat pump you are activating.
The number can be found on the ID plate attached on the
control centre cover panel behind the front door and on the
back cover of the user manual (see example of the plate
on next page).
If the serial number is correct, you will get the following
message. Choose ‘
Next’ .
Next you are asked to enter the “ PIN code” , which is
1000 .
11.5 Connecting to the heat pump’s Wi-Fi
network
In order to gain access to the Aries heat pump via
application you are to connect to the heat pump’s Wi-Fi
network.
Below is an example of the heat pump’s ID plate, on
which you find
the SSID and Wifi key , which are needed
when entering the Wi-fi settings on your smart device.
The Wi-fi settings have to be entered on your smart device
so that you can connect to the heat pump’s network and
start-up the heat pump via application.
On the label you also find the heat pump’s serial number
which you need identify the device when logging into the
application.
ID plate attached on the control centre cover panel behind
the front door and on the back cover of the user manual.