Gebwell Aries 12, Installation And Commissioning Manual

Page: 13 / 60

v 1-4 05022019 13
7. Loosen the screws on the compressor unit mounts and
detach the compressor unit’s plugs from both the
electrical switchboard and the compressor unit.
8. Pull the compressor unit out.
4.8 Removing the packaging
The product is packaged in protective plastic in such a
way that it can be installed without removing the plastic.
The protective plastic can be retained to protect the heat
pump until it is started up.

Ensure that you have received the correct product with
the correct accessories.

Place the heat pump near the intended installation
location.

Lift the heat pump off the shipping pallet.

Use the adjustable feet to get the heat pump into a
horizontal and stable position.

Make sure the frame is not in contact with the
building’s structures, with the exception of the
adjustable feet.
4.9 Heat pump placement
The placement of the heat pump must take account of a
few factors related to safety, convenience and
serviceability.
The temperature of the placement location must be
b5°C and +30°C. The installation space must be
adequately ventilated. Water condenses on the cold
sections of pipe in the collector if the space is very humid.
The heat pump’s compressor (K1) generates a noise that
can be conducted along the structures of the house into