GEA Aseptomag RVIN, Operating Instruction

Page: 3 / 56

TABLE OF CONTENTS
1 General Information 5
1.1 Information on the Document 5
1.1.1 Binding Character of These Operating Instructions 5
1.1.2 Notes on the Illustrations 5
1.1.3 Symbols and Highlighting 5
1.2 Manufacturer address 6
1.3 Customer service 6
1.4 EC Declaration of Incorporation 7
2 Safety 8
2.1 Intended use 8
2.1.1 Requirements for operation 8
2.1.2 Pressure equipment directive 8
2.1.3 ATEX directive 8
2.1.4 Improper operating conditions 8
2.2 Operator’s Duty of Care 9
2.3 Subsequent changes 10
2.4 General safety instructions and dangers 10
2.4.1 Principles for safe operation 10
2.4.2 Environmental Protection 10
2.4.3 Electrical Equipment 11
2.5 Supplementary Regulations 11
2.6 Qualification of personnel 11
2.7 Safety equipment 12
2.7.1 Signage 12
2.8 Residual dangers 13
2.9 Danger zones 13
3 Description 15
3.1 Design of the valve 15
3.2 Valve Identification 16
3.3 Inverted Valve Function 18
3.4 Sealing Concepts 19
3.5 Control loop of the positioner (example) 19
4 Transport and storage 21
4.1 Storage conditions 21
4.2 Transport 21
4.2.1 Scope of supply 21
5 Technical data 22
5.1 Technical data 22
5.2 Control parameters 23
6 Assembly and installation 24
6.1 Safety instructions 24
6.2 Notes on installation 24
6.3 Welding In a Valve with Pipe Connection 24
6.3.1 Welding In and Installing a Valve 24
6.3.2 Welding post-treatment 25
6.4 Pneumatic connections 26
6.4.1 Air requirement 26
6.4.2 Establishing the Compressed Air Supply 26
6.5 Electrical connections 26
7 Start-up 28
7.1 Safety instructions 28
7.2 Notes on commissioning 28
8 Operation and control 29
8.1 Safety instructions 29
9 Cleaning 30
9.1 Cleaning 30
9.2 Sterilisation 30
9.3 Passivation 30
10 Maintenance 31
430BAL011926EN_1
30.08.2019 3