Fig.33:
Lifting out spring package
®
Actuator has been dismantled into its individual parts.
!
Opening the spring assembly is forbidden for safety reasons.
®
Actuator PA80 - PA255 has been disassembled.
10.10.2 Assembling Actuator PA80 - PA255
Hint!
Pay attention to the following points when assembling the actuator:
•
Replace all visible seals.
•
Thoroughly clean and check the interior cylinder contact surfaces, O-ring
grooves, piston rod and piston disc.
•
When changing the seals, do not damage the seal groove.
•
Use only replacement seals from the seal set indicated in the list of
spare parts.
•
Grease all seals and the associated contact surfaces with the food-
grade lubricant PARALIQ GTE 703.
PA80 - PA255: assembling the actuator
Carry out the following steps:
1.
Assemble the actuator in the reverse order of disassembly, see
Section 10.10.1, Page 42.
®
Actuator has been assembled.
Installing the assembly spring
Tools required:
•
Flexible head spanner
Maintenance
Disassembling and Assembling Actuator PA80 - PA255
430BAL011926EN_1
30.08.2019
45
Summary of Contents for Aseptomag RVIN
Page 55: ...Appendix 430BAL011926EN_1 30 08 2019 55...
Page 56: ......
