1.
Bring the actuator to the non-actuated position.
2.
Remove the feedback unit.
3.
Attach the
clamping piece
on the rear of the actuator.
Fig.28:
Attaching clamping piece
4.
Clamp the actuator at the
clamping piece
into the
vice
.
Fig.29:
Clamping the actuator
®
Disassembly has been prepared
Removing assembly spring
Carry out the following steps:
1.
Turn the actuator base counter-clockwise using a
flexible head spanner
, see
illustration.
!
Rotate the actuator base until the assembly spring begins to move out of the
slot in the cylinder.
Maintenance
Disassembling and Assembling Actuator PA80 - PA255
430BAL011926EN_1
30.08.2019
43
Summary of Contents for Aseptomag RVIN
Page 55: ...Appendix 430BAL011926EN_1 30 08 2019 55...
Page 56: ......
