•
Slotted screwdriver
Carry out the following steps:
1.
Align the actuator base relative to the cylinder housing so that the hole in the
base is visible through the slot in the cylinder.
Fig.34:
Aligning hole to slot
2.
Insert the angled part of the assembly spring into the hole of the actuator
base.
Fig.35:
Hooking in the assembly spring
3.
Turn the actuator base 360° counter-clockwise using a
flexible head spanner
.
®
The assembly spring is pulled into the cylinder.
Fig.36:
Screwing in the assembly spring
4.
As soon as both open ends of the assembly spring are visible in the slot area,
the beginning of the assembly spring must be pressed into the hole in the
actuator base with a
slotted screwdriver
.
!
Carefully continue to turn the actuator base at the same time.
Maintenance
Disassembling and Assembling Actuator PA80 - PA255
430BAL011926EN_1
46
30.08.2019
Summary of Contents for Aseptomag RVIN
Page 55: ...Appendix 430BAL011926EN_1 30 08 2019 55...
Page 56: ......
