Each member of staff must meet the following requirements to be allowed to work
on the valve:
•
Personal qualification for the relevant task.
•
Sufficient professional qualification for the relevant task.
•
Instructed with regard to the function of the valve.
•
Instructed with regard to the operating sequences of the valve.
•
Familiar with the safety devices and their function.
•
Familiar with these Operating Instructions, especially with the safety
instructions and the information which is relevant for the task on hand.
•
Familiar with the basic regulations with regard to occupational health and
safety and accident prevention.
For work to be carried out on the valve the following user groups are
distinguished:
User groups
Staff
Qualifications
Operating staff
Adequate instruction and sound knowledge in the following areas:
•
Function of the valve
•
Valve operating sequences
•
What to do in case of an emergency
•
Lines of authority and responsibilities with respect to the task
Maintenance staff
Adequate instruction as well as sound knowledge of the design
and function of the valve.
Sound knowledge in the following areas:
•
Mechanical equipment
•
Electrical equipment
•
Pneumatic system
Authorization with regard to safety engineering standards to carry
out the following tasks:
•
Setting devices into operation
•
Earthing of devices
•
Marking of devices
The relevant certificates of qualification must be submitted before
work can be carried out on ATEX certified machines.
2.7
Safety equipment
2.7.1
Signage
No warning signs are affixed to this valve.
Safety
Safety equipment
430BAL012727EN_1
12
03.01.2018
Summary of Contents for Aseptomag GD
Page 65: ...Appendix 430BAL012727EN_1 03 01 2018 65...
Page 66: ......
