Fig.54:
Remove securing elements and drive components
®
Actuator PA80LL - PA180LL has been disassembled.
10.12.2 Assembling Actuator PA80LL - PA180LL
Hint!
Pay attention to the following points when assembling the actuator:
•
Replace all visible seals.
•
Thoroughly clean and check the interior cylinder contact surfaces, O-ring
grooves, piston rod and piston disc.
•
When changing the seals, do not damage the seal groove.
•
Use only replacement seals from the seal set indicated in the list of
spare parts.
•
Grease all seals and the associated contact surfaces with the food-
grade lubricant PARALIQ GTE 703.
PA80LL - PA180LL: assembling the actuator
Carry out the following steps:
1.
Assemble the actuator in the reverse order of disassembly, see
Section 10.12.1, Page 52.
®
Actuator PA80LL - PA180LL has been assembled.
Installing the assembly spring
Tools required:
®
Flexible head spanner
®
Slotted screwdriver
Carry out the following steps:
1.
Align the actuator base relative to the cylinder housing so that the hole in the
base is visible through the slot in the cylinder.
Maintenance
Disassembling and Assembling Actuator PA80LL - PA180LL
430BAL012727EN_1
03.01.2018
55
Summary of Contents for Aseptomag GD
Page 65: ...Appendix 430BAL012727EN_1 03 01 2018 65...
Page 66: ......
