!
Pay attention to the alignment of the piston disc (asymmetrical design)
already when disassembling.
Fig.49:
Remove securing elements and actuator components
®
Actuator PA30LL - PA60LL has been disassembled.
10.11.2 Assembling Actuator PA30LL - PA60LL
Hint!
Pay attention to the following points when assembling the actuator:
•
Replace all visible seals.
•
Thoroughly clean and check the interior cylinder contact surfaces, O-ring
grooves, piston rod and piston disc.
•
When changing the seals, do not damage the seal groove.
•
Use only replacement seals from the seal set indicated in the list of
spare parts.
•
Grease all seals and the associated contact surfaces with the food-
grade lubricant PARALIQ GTE 703.
Carry out the following steps:
1.
The actuator PA30LL-PA60LL is assembled in the reverse order of
disassembly, see Section 10.11.1, Page 49.
®
Actuator PA30LL - PA60LL has been assembled.
10.12
Disassembling and Assembling Actuator PA80LL - PA180LL
10.12.1 Disassembling Actuator PA80LL - PA180LL
Tools required:
•
Flexible head spanner
•
Assembly tool for clamping device
Maintenance
Disassembling and Assembling Actuator PA80LL - PA180LL
430BAL012727EN_1
52
03.01.2018
Summary of Contents for Aseptomag GD
Page 65: ...Appendix 430BAL012727EN_1 03 01 2018 65...
Page 66: ......
