GE Voluson P8 BT16, Basic Service Manual

Page: 489 / 612

GE DRAFT V
OLUSON
™ P8 / V
OLUSON
™ P6
DIRECTION 5723243, R
EVISION
6 DRAFT (M
AY
23, 2018) B
ASIC
S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures 8-141
Section 8-44
Replacement of the HDD in DRFM
8-44-1 Manpower
One person, 30 minutes
8-44-2 Tools
Philips screwdriver
8-44-3 Preparations
1.) Power Off/Shutdown the system as described in 4-3-2 on page 4-4 .
2.) Remove the REAR CABINET BEZEL ASSY BT16 and disconnect cables as described in 8-28-4
"Removal Procedure" 2), 3), 4) and 7) on page 8-93 .
3.) Remove the NEST EMI BRKT BT16 as described in 8-56-4 "Removal Procedure"
4.) Remove the DRFM as described in 8-42-3 on page 8-130 .
8-44-4 Removal Procedure
1.) Unscrew 4 screws and pull the HDD out of the DRFM.
8-44-5 Installation Procedure
1.) Install the new parts in the reverse order of removal.
2.) Set up the new hard disk as described in 5-17-5-3-2 on page 5-72 .
3.) Perform: FRU8-32: Replacement of the HDD in DRFM - Functional Tests.
Figure 8-201 Pulling the HDD