GE TransPort PT878GC User Manual Download Page 84

Page: 84 / 311

April 2009

4-20

Programming Site Data

Entering Inputs in the Standard Volume Option (cont.)

The next prompt appears if you have selected a fixed pressure.
The PT878GC asks for the fixed pressure value.

Press

[ENTER]

to open the text box.

Use the numeric keys to enter the known pressure.

Press

[ENTER]

to confirm the entry.

Whether you have selected a fixed or an active supply, the
PT878GC asks for the desired input.

From the Pressure text box, press the [

] arrow key to

reach the Input # menu.

Press

[ENTER]

to open the drop-down menu.

Scroll to Input A or B.

Press

[ENTER]

to confirm the entry.

The next prompt asks if the temperature is fixed or active.

Use the [

] and [

] keys to scroll to the appropriate

radio button.

Press

[ENTER]

to confirm your selection.

The next prompt appears if you have selected a fixed
temperature. The PT878GC asks for the fixed temperature
value.

Press

[ENTER]

to open the text box.

Use the numeric keys to enter the known temperature (in
degrees C or F), and press

[ENTER]

to confirm the entry.

Whether you have selected a fixed or an active temperature,
the PT878GC asks for the desired input.

Press

[ENTER]

to open the drop-down menu.

Scroll to Input A or B.

Press

[ENTER]

to confirm the entry.

Summary of Contents for TransPort PT878GC
























































































































































































































































































































Search results

Summary of Contents for TransPort PT878GC

Reviews:

Related manuals for TransPort PT878GC

Brands by name

Popular brands

GE TransPort PT878GC, User Manual

Search results

Summary of Contents for TransPort PT878GC

Reviews:

Related manuals for TransPort PT878GC

Brands by name

Popular brands