manualshive.com logo in svg

GE TransPort PT878GC, User Manual, Page: 156 / 311

Share
Download
GE TransPort PT878GC User Manual Download Page 156

Displaying and Configuring Data

6-19

April 2009

Deleting a File

To delete a file in the File Manager, first be sure you have 
highlighted that site in the left window of the File Manager. Then 
press 

[MENU]

, scroll to the Delete option, and press 

[ENTER]

. The 

screen appears similar to Figure 6-15 below.

Figure 6-15: The Delete Confirmation Window

•

Press 

[F2]

, No, to cancel the deletion and return to the File 

Manager, or

•

Press 

[F3]

, Yes, to delete the site.

The File Manager appears, with the highlighted site now deleted.

1 View

Programming

File Manager

  No

Yes

Info:DEFAULT

        

GLOBAL

File

DEFAULT

Delete Confirmation

Res

Re

Delete The Site ‘A.SIT’ 
Are You Sure?

Summary of Contents for TransPort PT878GC
























































































































































































































































































































Reviews:

No comments