GE PDM, Service Manual

Page: 40 / 92

5-2 Patient Data Module 2030047-001A
Maintenance
Maintenance schedule
Manufacturer recommendations
To help ensure the equipment remains in proper operational and functional order,
adhere to a good maintenance schedule. The manufacturer recommends that the
following be performed by service personnel upon receipt of the equipment, every 12
months thereafter, and every time the unit is serviced:
„
Visual inspection
„
Cleaning
„
Battery maintenance
„
Electrical safety tests (See the Solar 8000M/i patient monitor v5 service manual,
Maintenance and checkout chapter for system tests.)
„
Checkout procedures (See the Solar 8000M/i patient monitor v5 service manual,
Maintenance and checkout chapter for system tests.)
Manufacturer responsibility
WARNING
Failure on the part of all responsible individuals, hospitals or
institutions, employing the use of this device, to implement the
recommended maintenance schedule may cause equipment failure
and possible health hazards. The manufacturer does not, in any
manner, assume the responsibility for performing the recommended
maintenance schedule, unless an Equipment Maintenance
Agreement exists. The sole responsibility rests with the individuals,
hospitals, or institutions utilizing the device.
Inspection
Remove power and all cables before inspecting or cleaning the equipment.
Inspect the equipment and its components carefully prior to installation, once every
12 months thereafter and each time the equipment is serviced. Do not use the
equipment if damage is determined. Refer damaged equipment to qualified service
personnel.
„
Inspect the case for cracks or other physical damage.
„
Inspect cables for fraying or other damage.
„
Inspect all plugs and connectors for bent pins or other damage.
„
Check for loose or missing screws on the mounting hardware.
NOTE
Damaged cables or equipment should be replaced by service personnel.