Stainless Steel Surfaces
(on some models)
Painted Surfaces
Painted surfaces include the door,
top of the control panel and the drawer
front. Clean these with soap and water
or a vinegar and water solution.
Do not use commercial oven cleaners,
cleaning powders, steel wool or harsh
abrasives on any painted surface.
35
Oven Racks
All oven racks may be cleaned by hand
with an abrasive cleaner or steel wool.
After cleaning, rinse the racks with clean
water and dry with a clean cloth. Gray
porcelain-coated oven racks may remain
in the oven during the self-cleaning cycle
without being damaged. The nickel-
plated oven racks may remain in the oven
during the self-cleaning cycle,
but they will lose their luster and become
hard to slide. It will be necessary to grease
all oven rack side edges with a light
coating of vegetable oil after cleaning
them by hand or in the oven. This will
help maintain the ease of sliding the
racks in and out of the oven.
www.GEAppliances.ca
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest you,
please call our toll-free number:
National Parts Center
1.800.661.1616
geappliances.ca
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Flat rack
Handles
Use the rack with the two front
handles in the upper oven.
Use the rack without the two front
handles in the lower oven.
Summary of Contents for PCB975
Page 48: ...48 ...
