manualshive.com logo in svg

GE Multinet 4, Instruction Manual

The GE Multinet 4 Instruction Manual, available for free download at manualshive.com, provides detailed guidance on operating and maximizing the potential of this versatile product. This comprehensive manual offers step-by-step instructions and expert tips to ensure a seamless user experience with the GE Multinet 4.

Share
Download
background image

6–14

MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL

OPERATIONAL GUIDE

CHAPTER 6: OPERATIONAL GUIDE

When an SSL connection is first established, a handshake protocol is executed. The 
handshake accomplishes the following:

• negotiates connection parameters
• optionally authenticates the peer
• determines a shared master secret

If the handshake succeeds, data transferred over the connection is now encrypted using 
the negotiated encryption algorithm and the shared master secret.

For more detailed information on SSL see the following texts:

Rescorla, Eric. 

SSL and TLS: Designing and Building Secure Systems, 

Addison Wesley, ISBN 

0201615983.

Viega, John. Messier, Matt. Pravir, Chandra. 

Network Security with OpenSSL

, O'Reilly Media 

Inc., ISBN 0-596-00270-X.

6.5.2.2 Multinet4 SSL Version Support

Each terminal server connection on a Multinet4 product may be authenticated and 
encrypted using SSL. The product supports the following versions of SSL:

• SSLv3
• TLSv1

SSLv2 has many known vulnerabilities and is not supported.

6.5.2.3 Secure Web Server using HTTP over SSL (https://)

Secure Sockets Layer (SSL) and its successor, Transport Layer Security, defined in RFC 2246, 
(TLS) are cryptographic protocols to protect traffic on the Internet.

SSL and non-SSL access to the web server is always available. The system is shipped with a 
default web server key and certificate. We recommend that you generate and install a 
new key file. You can do this by uploading the file to the keys page and then selecting the 
new key on the web server configuration page. No reboot is necessary for the change to 
take effect.

6.5.3

Keys and Certificates

Multinet4 supports RSA public key encryption and x.509 certificates. RSA is a widely-used 
algorithm for public key encryption. X.509 is an International Telecommunication Union 
Telecommunication Standardization Sector (ITU-T) standard for public key infrastructure 
(PKI).

Multinet4 uses keys and certificates encoded using the Privacy enhanced Mail (PEM) 
format. These files conventionally use the .pem extension.

A PEM file containing both a valid X.509 certificate chain and a valid RSA private key is 
treated as a certificate file. Manage these files with the 

4.8.1.1: Certificates: Local

 screen 

and the 

4.8.1.2: Certificates: Trusted

.

For an extended discussion and examples of key file and certificate file generation see 

section 6.5.3.9: Certificate and Key File Generation

.

Summary of Contents for Multinet 4































































































































































































































































































































Reviews:

No comments

Related manuals for Multinet 4

IBM TotalStorage 3534-F08 Installation And User Manual preview
TotalStorage 3534-F08
Brand: IBM Pages: 105
IBM RedBooks SAN24B-5 Product Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 11
IBM RedBooks SAN24B-5 Quick Start Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 2
IBM F16 User Manual preview
F16
Brand: IBM Pages: 123
IBM 8265 Nways ATM Switch User Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 192
Radial Engineering Gold Digger User Manual preview
Gold Digger
Brand: Radial Engineering Pages: 8
Radial Engineering BigShot ABY User Manual preview
BigShot ABY
Brand: Radial Engineering Pages: 2
Qlogic SANbox 5600 Series Interface Manual preview
SANbox 5600 Series
Brand: Qlogic Pages: 408
Communica CST-2042 User Manual preview
CST-2042
Brand: Communica Pages: 5
Gilat SkyEdge II-c Capricorn Pro 4 AC Series Installation Notes preview
SkyEdge II-c Capricorn Pro 4 AC Series
Brand: Gilat Pages: 2
Attwood 4204 Installation Instructions preview
4204
Brand: Attwood Pages: 2
Orno OR-GB-422 Quick Start Manual preview
OR-GB-422
Brand: Orno Pages: 2
Raritan PC-Share Installation And Operation preview
PC-Share
Brand: Raritan Pages: 4
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Brand: KanexPro Pages: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Brand: C&C TECHNIC Pages: 2
KinAn DV2302 User Manual preview
DV2302
Brand: KinAn Pages: 5
BENDIX SL-3-SL-4 STOP LIGHT SWITCH Manual preview
SL-3-SL-4 STOP LIGHT SWITCH
Brand: BENDIX Pages: 4
Nxg VCH8 Owner'S Manual preview
VCH8
Brand: Nxg Pages: 2

Brands by name

Popular brands

Load more brands