CHAPTER 4: SYSTEM ADMINISTRATION
SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
4–31
4.2.11 Configuration
The Configuration: Files and the Configuration: Defaults screens shown below, allow you to
make system-wide changes by installing a new system configuration file or by returning to
factory defaults.
4.2.11.1 Configuration: Files
This screen enables you to install and manage configuration files.
When the system is shipped from the factory, it contains a single current configuration file
with factory default values called "config0.xml". Subsequent configuration files will contain
the administrator’s saved settings.
FIGURE 4–21: Administration: Configuration: Files
The table below describes the tasks you can perform in the
Configuration Files
screen.
Table 4–22: Configuration Files
Field Name
Field Value
The Install Form
File:
To install a configuration file:
1.
Browse to a file on you local system, or enter the full
path name of a configuration file.
2.
Click
Upload
.
Browse:
Browse to select a configuration file on your local system.
Upload:
Click this button to make the file specified in
pathname
the
“Current” configuration file. If the configuration is valid the
system is reconfigured according to the contents of the file.
