CHAPTER 3: DDFR CONFIGURATION
USING ENERVISTA DDFR SETUP SOFTWARE
DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
53
•
Clear Data
: Click to clear event/waveform/datalog already
collected in DDFR unit.
•
Reset DDFR
: Click to force a DDFR system reboot.
Note
Before clicking on Clear Data, make sure you have archived the information contained
in the DDFR, using the DDFR Archiver, as all the event/waveform/datalog will be
deleted.
FIGURE 3–6: The Commands Menu
• The
Actual Values
menu contains all the menu items and appropriate fields
required for allowing you to select which records and information to view for
interrogating data
•
Events
: Click to view the DDFR Event viewer in a separate
window.
Most recent 300 to 500 events per device, depending on number
of devices configured in the DDFR unit.
•
Waveforms
: Click to view a listing of Waveforms in the right hand
section of the main window. Click on any Waveform to see a
COMTRADE view of that Waveform.
Most recent 10 to 50 waveforms per device, depending on
number of devices configured in the DDFR unit.
•
DataLogger
: Click to view a listing of DataLogs in the right hand
section of the main window. Click on any DataLog to see a
COMTRADE view of that DataLog.
Most recent 10 to 50 DataLogs per device, depending on number
of devices configured in the DDFR unit,
Summary of Contents for Multilin DDFR
Page 3: ......
Page 4: ......
Page 8: ...TOC IV DISTRIBUTED DIGITAL FAULT RECORDER INSTRUCTION MANUAL TABLE OF CONTENTS ...
