GE Multilin DDFR, Instruction Manual

Page: 60 / 118

52 DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
USING ENERVISTA DDFR SETUP SOFTWARE CHAPTER 3: DDFR CONFIGURATION
.
FIGURE 3–4: The Device Definition Menu
• The Settings menu contains all the menu items and settings required for setting up
the DDFR to retrieve records from the protection relays in the station, and for
setting up appropriate watchdogs in the DDFR.
• DDFR Lock : Click to access the DDFR Lock/Unlock dialog on the
right-hand section of the main window. Before DDFR settings can
be changed, the DDFR Lock/Unlock status has to be set to
Unlock . Once you have changed any DDFR settings, the Lock/
Unlock status should be reset to Lock .
Before closing the EnerVista DDFR Setup application, make sure
the DDFR status is
Lock .
• Device Setup : Click to configure new relays or change the
configuration of existing relays, attached to this DDFR.
This dialog appears in a separate dialog box.
• Watchdogs : Click to view the DDFR DriveSpace Watchdog
configuration (fixed) and view/configure your External
Watchdogs.
FIGURE 3–5: The Settings Menu
• The Commands menu contains:
• Synchronize Clock : Click to synchonize the DDFR real-time clock
with that of the computer.